Search Results
633
Products for "c2c"
Filter
- Description
- Two-hole hinged connector for assembling seismic bracing of MT strut channel framing
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised light-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hard-sided carrying case for storing and transporting your Hilti drill driver and its accessories
- Types
- Individual tool cases
- Compatible with
- Drill drivers
- Dimensions (LxWxH)
- 395 x 295 x 80 mm
ultimate
- Description
- SDS Plus (TE-C) stop bit for HKD anchors
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
Nuron
- Description
- Cordless circular saw for wood cutting up to 60 mm | 2-3/8" with a faster 165 mm | 6-1/2" diameter universal wood saw blade
- Max. cutting depth
- 60 mm
- Blade diameter
- 165 mm
- Base material
- Drywall, Fibre board, Fibre cement board, Gypsum board, Hardwood (beech, oak etc.), Laminated board, Plastic, Plexiglass, Plywood, Softwood (fir, pine, etc.), Wood, Wood composites
- Description
- Two-hole hinged connector for assembling seismic bracing of MT strut channel framing, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Types
- Multitool cases
- Compatible with
- Multitool cases
- Dimensions (LxWxH)
- 495 x 395 x 149 mm
- Description
- Side handle for demolition hammers
No technical data available
ultimate
- Description
- Impact socket set for tightening bolts and anchors
- Connection end
- 1/2 in square
- Short/long
- Long
- Material coating/plating/finish
- Black phosphate
- Description
- Post-installed hoist point for temporary suspensions during installation and maintenance in elevator shafts
- Material, corrosion
- Cast-iron, Multilayer coating
- Head configuration
- n/a
- Base materials
- Concrete (cracked), Concrete (uncracked)
- Description
- Stainless steel (A4) medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Replacement parts and optional extras for Hilti cordless shears, including cutter blades, replacement chip clippers and tool cases
No technical data available
- Description
- Hard-sided carrying case for storing and transporting your Hilti impact driver or impact wrench and its accessories
- Types
- Individual tool cases
- Compatible with
- Impact wrenches
- Dimensions (LxWxH)
- 444 x 395 x 119 mm
- Description
- Clamping pliers and accessories for safe wire connection
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless shears, including cutter blades, replacement chip clippers and tool cases
No technical data available
ultimate
- Description
- Self-sharpening SDS Plus (TE-C) pointed chisel bits for demolishing concrete and masonry
- Connection end
- TE-C (SDS-plus)
- Product class
- Ultimate
New
ultimate
- Description
- Mixed sets of SDS Plus (TE-C) chisel bits for breakers and demolition hammers
- Connection end
- TE-C (SDS-plus)
- Product class
- Ultimate
- Description
- 45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Ultimate SDS Plus (TE-C) hammer drill bit for anchor drilling into reinforced concrete (metric)
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Ultimate SDS Plus (TE-C) hammer drill bit for anchor drilling into reinforced concrete (imperial)
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Piston accessory kits for powder actuated tools
- For use with (tools)
- DX 2
- Additional accessory information
- 1 x piston 2/DNI, 1 x spring clip DX 2
- Description
- Replacement parts and optional extras for Hilti cordless shears, including cutter blades, replacement chip clippers and tool cases
No technical data available
- Description
- Replacement parts and optional extras for Hilti cordless shears, including cutter blades, replacement chip clippers and tool cases
No technical data available
- Description
- Accessories for your Hilti consumables cases such as plastic bins
- Types
- Boxes
- Description
- Accessories for your Hilti consumables cases such as plastic bins
- Types
- Boxes
- Description
- Collated screw auto-feed attachment for 25-51 mm long screws – for interior finishing applications
- Length
- 193 mm
- Magazine capacity
- 40
- Screw length - min.
- 25 mm
- Description
- Ultimate SDS Plus (TE-C) hammer drill bits sets with different bit diameters and lengths (metric)
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Ultimate SDS Plus (TE-C) hollow drill bit for virtually dust-free hammer drilling in concrete
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- SDS Plus (TE-C) hammer drill stop bit for HKD-TE-CX short HKD setting tools
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
ultimate
- Description
- Self-sharpening SDS Plus (TE-C) flat chisel bits for precision demolition of concrete and masonry
- Connection end
- TE-C (SDS-plus)
- Product class
- Ultimate
ultimate
- Description
- Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
Nuron
- Description
- Cordless circular saw with minimised weight and size for overhead cuts up to 51 mm│2" depth (Nuron battery platform)
- Max. cutting depth
- 51 mm
- Blade diameter
- 136 mm
- Base material
- Metal, Steel, Stainless steel
- Description
- Green beam combi-laser with 2 queues and 4 points for plumbing, leveling, aligning and squaring (12V battery platform)
- Accuracy
- ±3 mm at 10 m
- Max. operating distance (diameter)
- 40 m (lines), 100 m (lines, with receiver)
- Maximum operating time
- 33 h
- Description
- 45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- hot-dip galvanised (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
Nuron
- Description
- Ultimate-class, high-torque cordless impact wrench with 1/2" friction ring anvil for structural bolting and anchoring (Nuron battery platform)
- Anvil type
- 1/2" friction ring
- Maximum torque
- 600 Nm (1); 1000 Nm (2)
- Nut-busting torque
- 1650 Nm
Nuron
- Description
- Cold-cutting cordless metal saw for extra-fast, precision cutting up to 60 mm│2-3/8" depth (Nuron battery platform)
- Max. cutting depth
- 60 mm
- Blade diameter
- 165 mm
- Base material
- Metal, Steel, Stainless steel, Non-ferrous metal
- Description
- Powerful pistol-grip, triple-mode, multi-purpose SDS Plus (TE-C) rotary hammer with chipping function
- Weight according EPTA-Procedure 01/2003 without battery
- 3.1 kg
- Optimum hammer drilling range
- 6 - 16 mm
- Single impact energy
- 2.5 J
- Description
- Injectable mortar accessories for overhead applications
No technical data available
- Description
- Accessory for angle grinders
- Additional accessory information
- For angle grinder disc diameters 125mm, 150mm, 180mm and 230mm
Nuron
- Description
- Power-class cordless impact wrench with 1/2" friction ring anvil for a wide range of concrete anchoring and steel or wood bolting (Nuron battery platform)
- Anvil type
- 1/2" friction ring
- Maximum torque
- 300 Nm (1); 450 Nm (2)
- Nut-busting torque
- 650 Nm
- Description
- Advanced heavy-duty diamond drilling tool with optional Cut Assist autofeed unit for coring very small to large diameter holes of 12-500 mm (1/2" - 20”)
- Diameter range
- 12 - 500 mm
- Base material
- Concrete, Reinforced concrete, Asphalt
- Operation mode
- Rig-based drilling system
Nuron
- Description
- Precision plunge circular saw with high dust capture rate for clean and controlled, straight cuts in wood up to 53 mm│2-1/8" depth with guiderail
- Max. cutting depth
- 57 mm
- Blade diameter
- 165 mm
- Base material
- Drywall, Fibre board, Fibre cement board, Gypsum board, Hardwood (beech, oak etc.), Laminated board, Plastic, Plexiglass, Plywood, Softwood (fir, pine, etc.), Wood, Wood composites
Nuron
- Description
- Cordless double cut shear for fast cuts in sheet metal and profiles up to 2.5 mm│12 Gauge – with Hilti SSH CS blades included (Nuron battery platform)
- Material type
- Flat sheet, C.L.U. profile
- Rated voltage
- 21.6 V
- Tool body weight
- 2.2 kg
ultimate
- Description
- Self-sharpening SDS Plus (TE-C) scaling chisels for scraping away weld spatter, formwork seepage and other residues (one-sided cutting edge)
- Connection end
- TE-C (SDS-plus)
- Application
- Scaling, Channeling
- Product class
- Ultimate
- Description
- Heavy-duty diamond coring machine with high-frequency motor and optional auto-feed unit for rig-based coring from 52-500 mm (2-1/16 - 19-11/16”) in diameter
- Diameter range
- 52 - 500 mm
- Base material
- Concrete, Reinforced concrete
- Operation mode
- Rig-based drilling system
Nuron
- Description
- USB charging adapter for Nuron batteries, with wireless charging, USB-C PD and USB-A ports to charge laptops, tablets and more devices
- Battery System Compatibility
- Nuron
- Description
- Cordless diamond coring machine for handheld or rig-based coring from 52-162 mm (2 – 6-3/8") in concrete or up to 252mm (10") in masonry (Nuron battery)
- Diameter range
- 52 - 162 mm
- Base material
- Masonry, Asphalt, Concrete, Reinforced concrete, Wood
- Operation mode
- Hand-held and rig-mounted drilling system
- Description
- Powerful SDS Plus (TE-C) rotary hammer for heavy-duty concrete drilling and corrective chiselling, with Active Vibration Reduction (AVR)
- Weight according EPTA-Procedure 01/2003 without battery
- 4.2 kg
- Optimum hammer drilling range
- 10 - 20 mm
- Single impact energy
- 3.6 J
Nuron
- Description
- Cordless circular saw with pre-mounted 190 mm | 7-1/4" blade, for precise cuts up to 70 mm│2-3/4" in wood and wood-based panels (Nuron battery platform)
- Max. cutting depth
- 70 mm
- Blade diameter
- 190 mm
- Base material
- Wood
- Description
- Accessories for your Hilti consumables cases such as plastic bins
- Types
- Boxes
- Description
- Accessory for Hilti detection/layout/laser tools
No technical data available
ultimate
- Description
- Ultimate core bit for coring in very abrasive concrete – for use with the DD EC-1 and DD 30-W (incl. Hilti C+ quick-release connection end)
- For use with
- DD 30-W
- Base materials
- Concrete (abrasive)
- Drilling mode
- Hand-held, Rig-mounted
- Description
- Accessories for the DGH 150 diamond grinder
No technical data available
- Description
- medium-duty C-Channel bracket for indoor applications
- Material composition
- Q235 or better steel
- Surface finish
- Electrogalvanized - for dry indoor use only
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- medium-duty C-Channel bracket for indoor applications
- Material composition
- Q235 or better steel
- Surface finish
- Electrogalvanized - for dry indoor use only
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)