Search Results
633
Products for "c2c"
Filter
standard
- Description
- Collated nail for fastening to concrete using powder-actuated nailers
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Setting tool for HDI anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- Green line laser with 2 high-visibility beams for leveling and aligning
- Accuracy
- ±3 mm at 10 m
- Max. operating distance (diameter)
- 40 m (lines), 100 m (lines, with receiver)
- Maximum operating time
- 8 h
- Description
- Setting tool for HAS-U anchor rods with HVU2 capsules
No technical data available
- Description
- Nut setter with non-magnetic / ball-lock screw retention for use with hex-head screws
- Feature
- Mechanical nutsetters
- Connection end
- 1/4 in hexagonal
ultimate
- Description
- Metal conduit strap with pre-mounted concrete nail for use with powder-actuated tools
- Application
- Conduit Fastening, Piping Connections
- Material
- Carbon steel
- For use with (tools)
- DX 351, DX 460, DX 5, DX 6
- Description
- Green point laser with 2 high-visibility dots for transferring points vertically and establishing plumb
- Accuracy
- ±3 mm at 10 m
- Max. operating distance (diameter)
- 40 m (points)
- Maximum operating time
- 60 h
premium
- Description
- Sealing cap for nails used in exposed roofs and cladding
- Application
- Water proofing
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Galvanised flexible channel connector for two-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
Nuron
- Description
- Compact charger for all Hilti Nuron batteries
- Battery System Compatibility
- Nuron
- Output power
- 90 W
- Output current
- 3.5 A
Nuron
- Description
- Top-speed charger optimised for high-capacity Nuron batteries
- Battery System Compatibility
- Nuron
- Output power
- 450 W
- Output current
- 18 A
Nuron
- Description
- High-speed charger for all Hilti Nuron batteries
- Battery System Compatibility
- Nuron
- Output power
- 240 W
- Output current
- 9.6 A
- Description
- Compact charger for Hilti 12V Li-ion batteries
- Battery System Compatibility
- 12 V
- Output power
- 50 W
- Output current
- 4 A
- Description
- Multi-voltage DC car charger for all Hilti Li-ion batteries
- Battery System Compatibility
- 14 V, 22 V, 36 V
- Output power
- 60 W
- Output current
- 4 A
- Description
- Multi-voltage fast charger for all Hilti Li-ion batteries
- Battery System Compatibility
- 22 V, 36 V
- Output power
- 350 W
- Output current
- 9 A
- Description
- Undercut tool – for creating the undercut for HDA anchors where rebars are hit
- Material, corrosion
- N/A
- Head configuration
- n/a
- Approvals / test reports
- N/A
- Description
- Hot-rolled cast-in anchor channels in standard sizes and lengths suitable for a wide range of applications
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanised, Stainless steel, A4
- Channel profile
- HAC-C 40/22, HAC-C 50/30, HAC-C 52/34
- PROFIS software
- Yes
- Description
- Cold-formed cast-in anchor channels in standard sizes and lengths for everyday applications
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanised, Stainless steel, A4
- Channel profile
- HAC-C 28/15, HAC-C 38/17, HAC-C 40/25, HAC-C 49/30, HAC-C 54/33
- PROFIS software
- Yes
standard
- Description
- Single nail for fastening to concrete using powder-actuated nailers
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
standard
- Description
- Single nail for fastening to concrete using powder-actuated nailers
- Base materials
- Concrete (soft)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- ETA-compliant retrofit premium firestop collar to help create a fire and smoke barrier around existing pipes between 50-250 mm
- Base materials
- Aerated Concrete, Concrete, Masonry, Drywall
- LEED VOC
- 7.6 g/l
- Expansion ratio (unrestricted, up to)
- 1:17
- Description
- Angle bracket for assembling light-duty strut channel structures
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Material thickness
- 6 mm
- Description
- Wing fitting for assembling strut channel structures
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Right-angle connector for assembling strut channel structures
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Adjustable angle bracket for assembling strut channels in a T shape
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Braced angle bracket for heavy-duty strut channel structures subject to 3D loads, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Fixation angle for attaching media to strut channels
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Strut channel connector for assembling and bracing modular support structures with longer spans
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Angular chuck
- Dimensions (LxWxH)
- 152 x 80 x 135 mm
- Additional accessory information
- Drilling in concrete and masonry
- Description
- Setting tool – required for installation of HDA undercut anchors
No technical data available
- Description
- Notched T-bolts for tension, perpendicular and parallel shear loads (3D loads)
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanised
- Compatible anchor channel
- HAC-50, HAC-60
- Channel profile
- HAC-V 35, HAC-V 40, HAC-V 50, HAC-V 60, HAC-V 70, HAC-V Rebar XTS, HAC-V EDGE
- Description
- Braced angle bracket for heavy-duty MT girder structures subject to 3D loads, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
ultimate
- Description
- Deep Hole Coring - Core Catcher Tube
- For use with
- DD 200, DD 250-CA, DD 350-CA, DD 500-CA
- Base materials
- n/a
- Wet or dry operation
- Wet and dry
- Description
- Ultimate-performance screw anchor for quicker permanent and temporary fastening in concrete (carbon steel, countersunk head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Countersunk Torx
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- High performance hot-rolled cast-in anchor channels in standard sizes and lengths suitable for a wide range of applications
- Material, corrosion
- Stainless steel, A4, Carbon Steel, Hot-Dip Galvanised
- Channel profile
- HAC-C-P 40/22, HAC-C-P 50/30
- PROFIS software
- Yes
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
standard
- Description
- Collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Angle bracket for assembling light-duty strut channel structures, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Wing fitting for assembling strut channel structures, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Right-angle connector for assembling strut channel structures, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable angle bracket for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Gusset plate for L-shaped connections with MT-70 and MT-80 girders, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Gusset plate for T-shaped connections with MT-70 and MT-80 girders, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Gusset plate for T-shaped connections with MT-80, MT-90 or MT-100 girders, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Fixation angle for attaching media to strut channels, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable, braced angle bracket for girder and strut channel structures subject to 3D loading, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Strut channel connector with corrosion-resistant coating for assembling and bracing modular support structures with longer spans, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
Nuron
- Description
- Compact and light weight SDS Plus cordless rotary hammer with pistol grip for best maneuverability when drilling overhead (Nuron battery platform)
- Weight according EPTA-Procedure 01/2003 without battery
- 2.3 kg
- Optimum hammer drilling range
- 4 - 12 mm
- Single impact energy
- 1.5 J
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Stop drill bit (HMU)
- Connection end
- TE-Y (SDS-max)
- Base material
- Concrete
- Description
- Stop drill bit (HMU)
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Disassembly tool – for easy removal of HDA undercut anchors
No technical data available
- Description
- Adjustable, braced angle bracket for heavy-duty MT girder structures subject to 3D loading, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Multi-voltage, multi-bay charger for all Hilti Li-ion batteries
- Battery System Compatibility
- 22 V, 36 V
- Output power
- 90 W
- Output current
- 4 A
- Description
- Setting tool for capsule anchor rods with hexagon heads
No technical data available
- Description
- Triple wing fitting for connecting four strut channels in a 3D structure
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hot-dip galvanized connector plate for cantilever connections with MT-80 MT-100 girders in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanized girder connector for assembling and bracing modular support structures in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanized girder connector for assembling and bracing modular support structures in moderately corrosive environments
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)