Engineering Center

I need to use M12 threaded rod grade 8.8 and set the embedment depth to achieve required tension loadings (fails in concrete breakout/pullout). I am looking to use either HIT-HY-200R or HIT-RE 500V3 and the ETA shows Hilti meter rod AM (HDG) 8.8 is available but the software won't allow me to set embedment depth into 32MPa c...

Have a 1050C fire rated cantilever on wall , can I have stand off from the wall? Customer requires 65mm.

Hi there, I'm trying to design a drill & epoxy anchor on the side of a circular column. Does HILTI Profis Engineering support curved surface? If not, could you suggest the best approximation to convert to a cubic shape?

Hello. I'm conducting a check of anchor bolts installed into a masonry wall (type HIT-HY 170 HAS-U A4 M12) and I've noticed that Hilti PROFIS Engineering forces me to select an anchor bolt of length 110. Crucially this means that I am unable to prescribe an embedment depth and I must accept the 80mm given to me. Why does the...

Hi All, I have reviewed HY200 and HY270 The masonry units and the limiting factors for HJ270 appear to be the physical unit shell failing. There is no option to make allowance made for reinforcement and grout in the wall. When looking at HY200 I could use the design site for the grout core and use a face offset but I am not ...

How do we log in that meeting?

Is the HBI Heavy-duty anchor HBI M14x115 #3556279 actually available? And when will it be included in the Profis options?

On PROFIS I was adding web stiffeners to one face of an RHS section on a recent project. When I added the stiffeners they were automatically added to the wrong face and I was unable to find a way to add them to desired face. With a doubly symmetric section, rotating the section would achieve this, but this was not the case for...

Hi Team, Could you please help with a query about PROFIS in regards to the concrete edge distance requirement under fire. Our team is currently working on a project having are some cases that the anchors should be designed under temperature (600°C), and We are using Profis to do the design (Euro code). However, when the 6 anc...

Hi Team. I am going to use HVU2 Mortar capsule with your M16 A4-70 (stainless steel) adhesive anchor. Based on your technical sheet I can apply max 80N.m torque to the anchor to avoid splitting failure during installation. But, my question is that when the adhesive is cured. Based on the M16 A4-70 studs/bolts I can apply up t...