Engineering Center

can rebar be post-fixed in HILTI epoxy/grout systems without any need to rotate the bar on insertion into the hole? This is to avoid clashing of adjacent installed bars.

can rebar be post-fixed in HILTI epoxy/grout systems without any need to rotate the bar on insertion into the hole? This is to avoid clashing of adjacent installed bars.

Hi, Which would be the best application for checking the bolts size and embedment for guide rail brackets?? I’ve tried to use two options, anchoring to concrete and anchoring to masonry but each one has gotten issues for this specific case. On the first option I’m able to input the loads for the axis X & Y, but I’m not a...

hello, i've signed up for the shear strengthening webinar on offer on 29th October and will be logging in from Sydney. The confirmation notes the time as 1:00pm but the calendar invite shows the time as 2pm. Can you confirm which is the correct time? Thanks, Jennifer

Our build team have proposed to install the a surge protection device box on an existing retaining wall made with the limestone blocks as per the attached drawings. We need to assess the feasibility of this solution. We were thinking we should be able the current design with the Hilti HIT-HY 270

Hello Hilti, I am currently involved in the specification of chemical anchors into limestone (Natural & Reconstituted) and was wondering if Hilti has conducted any testing for its chemical anchors. The anchors will be used for supporting façade panels. I was able to find the following paper Behaviour of post-installed adhesiv...

Please see the attached Hilti input. The edge distance in the positive X direction is set to infinity, which gives 93% utilisation. If the edge distance is changed to 1000mm, the utilisation increases to 203%. Moreover, changing the edge distance to 10000mm still results in 203% utilisation. Could you please explain why the ut...

How can I manually adjust the embedment for a HAS-U anchor. Profis is not letting me put a user-defined value.

I need countersunk fixings of 38mm hardwood battens to blockwork in cyclonic areas.

We need a recommendation