Engineering Center

As we understand, the tensile forces stated in Annex 10 are for the entire system which includes the bracket and two screws. Please correct us if we are wrong. What we are after is the tensile capacity for a single screw as we won’t be installing the bracket in our system. Therefore, we cannot use the stated capacity for our d...

Is resistant to chlorinated water concentrations up to those found in public swimming pools? If so, what is the maximum chlorination level that it is resistant to? Is Hilti HIT RE 500 adhesive approved to AS4020 for contact with potable water?

I have a building i am investigating for correct fire stopping the AHJ has identified that the collars have been painted and that this may affect the operation of the collar. I know that Promat have an approved test for painted collars I was wounding if Hilti have the same. this building was built from 2005-2008 and seemingly ...

how to increase the number of holes for the anchor bolts in base plate design in profis software?

Hi there, I hope you can confirm the correct product combination has been used in the scenario provided below. I am currently working on designing an equal angle support to bear a reinforced concrete member above. The EA support will be anchored on a reinforced concrete wall using M20 SS threaded rods with Hilti HIT HY 200-R...

Hi, I would just like to know why my anchor solution/calculation is failing although utilisation is only at 80% ? Thanks

How to customize the anchors layout in Hilti Profis as it can't be found under the basic version

I want to include the Hilti calculations from the PROFIS Rebar software in a Microsoft Word file calculation pack. Is there a way to export the design report from the Hilti PROFIS Rebar software to MS Word directly? I can export to pdf, png, jpg, bmp and Tiff formats, but not doc format. As a workaround, I can export to one of...

How do I save a file to my PC

Hi Hilti Team, We want to upgrade our account to Advanced Baseplate License to use some additional features such as enabling to add stiffeners in baseplate design. Please let us know how. Kind Regards, Benjun Solana